RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-18
RDF Messages
741
Cause. The receiver has received a message from the extractor that is out of order.
When this event occurs, the extractor automatically reestablishes synchronization with
the receiver. If the extractor has several outstanding requests to the receiver and the
first is found to be out of order, the receiver rejects each subsequent request with this
same error. When the extractor reestablishes synchronization, normal processing
resumes.
Effect. The receiver directs the extractor to reestablish synchronization.
Recovery. This is an informational message; no recovery is required.
742
filename
is the name of the audit trail file that contained the error.
rba
is the relative byte address where the error occurred in the audit trail file.
Cause. The extractor encountered an error in audit processing.
Effect. The extractor abends, thereby stopping the other RDF processes.
Recovery. Save the SAVEABEND file and the audit trail file, and consult your service
provider. You must reinitialize RDF.
743
Cause. A fatal error occurred in RDF.
Effect. RDF stops. Error 745 will probably follow this error.
Recovery. Restart RDF and contact your service provider.
RDF extractor message out of order
RDF extractor internal audit read error. file filename RBA
rba
Catastophic error encountered