RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-27
RDF Messages
771
Cause. The receiver has successfully completed its initialization.
Effect. The receiver is prepared to receive data from the extractor.
Recovery. This is an informational message; no recovery is required.
772
Cause. The receiver determined that TMF is not started on the RDF backup system.
Effect. The receiver abends.
Recovery. Start TMF on the backup system and then restart RDF.
773
vol => vol
are the volume on the primary node that the updater is protecting and the
corresponding volume to which it is writing on the backup node.
Cause. The updater has successfully completed its initialization. The message
includes the audited volume name and its corresponding update volume name.
Effect. The updater is prepared to apply updates to the database on the backup node.
Recovery. This is an informational message; no recovery is required.
774
Cause. The extractor has successfully completed its initialization.
Effect. The extractor will begin reading TMF audit data and transmitting it to the
receiver.
Recovery. This is an informational message; no recovery is required.
Remote RDF receiver started
TMF is not running on the remote system
Remote RDF updater started vol => vol
Local RDF extractor started