RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-28
RDF Messages
775
Cause. The extractor has encountered a restart condition during an online database
synchronization operation, and the current audit trail restart position sent by the
receiver may lead to loss of data.
Effect. The extractor revises its restart location to an earlier point in the audit trail,
thereby guaranteeing that no data will be lost.
Recovery. This is an informational message; no recovery is required.
776
Cause. The receiver has terminated normal processing as the result of a STOP TMF,
STOP RDF, or TAKEOVER command.
Effect. Normal RDF shutdown processing continues.
Recovery. This is an informational message; no recovery is required.
777
Cause. The extractor has received a STOP SYNCH message, but is not currently
involved in an online synchronization operation.
Effect. The extractor abends.
Recovery. This is an internal error. If no database synchronization operation was in
progress, you must restart RDF. If a database synchronization operation was in
progress, you must restart the entire operation from the beginning.
778
Cause. The updater has terminated normal processing as the result of a STOP TMF,
STOP RDF, STOP UPDATE, or TAKEOVER command.
Effect. Normal RDF shutdown processing continues. If this message is issued as the
result of a STOP UPDATE command, RDF will continue processing with updating
disabled.
Recovery. This is an informational message; no recovery is required.
Restart position adjusted for database synchronization
Remote RDF receiver shutdown complete
Unexpected STOP SYNCH message received
Remote RDF updater shutdown complete