RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual524388-001
C-38
RDF Messages
809
Cause. The operator issued a STOP RDF command.
Effect. The RDF process stops normally.
Recovery. This is an informational message; no recovery is required.
810
timestamp
is the time of the shutdown.
Cause. The operator issued a TMFCOM STOP TMF command at the primary node.
Effect. The RDF process stops normally.
Recovery. This is an informational message; no recovery is required.
811
Cause. The operator issued a TAKEOVER command.
Effect. RDF starts a TAKEOVER operation.
Recovery. This is an informational message; no recovery is required.
812
error#
is the file-system error number that identifies the specific error.
procname
is the name of the process with which the updater cannot communicate.
Cause. The updater encountered a file-system error while attempting to communicate
with the receiver or purger. The file-system error number and the name of the receiver
or purger are included in the message.
Effect. This is a catastrophic error; the updater abends, and RDF stops.
Shutting down in response to STOP RDF
Shutting down in response to STOP TMF, timestamp timestamp
RDF TAKEOVER initiated
Error error# communicating with procname