RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-48
RDF Messages
840
procname
is the name of the process that is in use.
Cause. A user-specified process, identified by procname, is already in use when the
monitor tries to start an RDF process with this same name.
Effect. The monitor shuts down RDF in an orderly manner.
Recovery. If you can stop the process and give it another name, you can then simply
restart RDF; otherwise, you will have to alter the name of the RDF process so that the
name does not conflict with other process names.
841
error#
is a file-system error number.
Cause. The monitor was unable to send shutdown messages to an updater because
of the indicated file-system error.
Effect. The monitor terminates the attempt to send STOP UPDATE messages to any
other updaters. It then sends an ABORT RDF message to all the other RDF
processes and waits for them to stop.
Recovery. If any updaters have not shutdown after the monitor has sent ABORT RDF
messages, then you may have to terminate the surviving updaters manually using a
TACL STOP command.
842
Cause. You issued a START RDF command, but the monitor detected that RDF has
already processed a TAKEOVER command.
Effect. The START RDF command fails.
Recovery. The backup database is consistent and ready for use as a backup
contingency database. Perform the rest of your installation-specific operations for
switching to the backup node (for example, rerouting communications and starting
applications).
Error - Process name is in use, procname
Error - Unable to complete STOP UPDATE. Error error#
Error - START prevented by RDF TAKEOVER