RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-49
RDF Messages
If you performed the takeover operation inadvertently, you will need to issue an
INITIALIZE RDF command and resynchronize the databases.
843
Cause. The receiver has received audit from the extractor that does not match the
version of audit that the receiver expects.
Effect. The monitor terminates the attempt to send STOP UPDATE messages to any
other updaters. It then sends an ABORT RDF message to all the other RDF processes
and waits for them to stop.
Recovery. If any updaters have not shut down after the monitor has sent the ABORT
RDF messages, then you might have to stop the surviving updaters manually using
TACL STOP commands.
844
Cause. The updater that generated this message has completed phase one of the
online synchronization operation for its volume on the backup system.
Effect. The updater starts phase two of the online synchronization operation.
Recovery. This is an informational message; no recovery is required.
845
Cause. The updater that generated this message has completed its synchronization
work for RDF initialization to an initialization timestamp.
Effect. The updater resumes its normal processing.
Recovery. This is an informational message; no recovery is required.
846
Cause. When the updater completed its RDF Takeover operation, it had not yet
completed its role in an online database synchronization.
Effect. The database might not be in a consistent state.
Incorrect version of audit received
Phase one database synchronization complete
Initialization synchronization completed
RDF TAKEOVER during database synchronization