RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-57
RDF Messages
871
Cause. The number of nodes contributing to transactions on the primary system has
reached the indicated number. The maximum number is 48.
Effect. The receiver resumes with normal processing.
Recovery. This is a warning. If the number of nodes contributing to transactions on
the primary system exceeds 48, the receiver abends. If you think you might exceed
that number, you are advised to stop RDF and reinitialize it using the INITTIME option.
872
Cause. An application has attempted an RDF lockstep operation but you have not
configured your RDF subsystem for lockstep operations.
Effect. No lockstep operations can take place, and the lockstep gateway process
abends.
Recovery. This is a warning. If you want lockstep operations, you must stop RDF and
create a new RDF configuration with the RDF LOCKSTEPVOL attribute set.
873
Cause. The purger has started as the result of a START RDF command.
Effect. The purger commences normal processing.
Recovery. This is an informational message; no recovery is required.
874
error#
is an error number.
error-detail#
is the detailed error number.
Cause. The specified error occurred while attempting to allocate an extended
segment.
Warning; number of network nodes has reached <num>.
Warning; Lockstep operation is denied.
Remote RDF purger started
SEGMENT_ALLOCATE_ returned error error#, error-detail#