RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-82
RDFCOM Messages
error#
is the NEWPROCESS error number that identifies the specific error.
Cause. A NEWPROCESS error occurred during START RDF or TAKEOVER
processing.
Effect. The START RDF or TAKEOVER operation is aborted.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting process errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the command that encountered the error. Otherwise, see your system
manager.
error#
is the NEWPROCESS error number that identifies the specific error.
Cause. A NEWPROCESS error occurred during START RDF or TAKEOVER
processing.
Effect. The START RDF or TAKEOVER operation is aborted.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting process errors, see the
Guardian Procedure Errors and Messages Manual. Correct the error and reenter the
START RDF or TAKEOVER command.
Cause. Audit required for the COPYAUDIT command on the remote system has been
purged, probably because the receiver’s RETAINCOUNT value was set too low.
Effect. The COPYAUDIT command aborts.
Recovery. There may be no recovery for this problem. You must perform the
database synchronization without the help of RDFCOM.
Illegal File Format: error
Illegal Home Terminal: error
Image files needed for Triple Contingency must have been
purged because the receiver’s retaincount must have been set
too low.