RDF/IMP and IMPX System Management Manual (RDF 1.4+)

Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-92
RDFCOM Messages
Recovery. Add a receiver with the same ATINDEX value or delete the particular
extractor.
Cause. You added an extractor and receiver with the specified ATINDEX, but there
are no updaters with that value.
Effect. The validation fails.
Recovery. Add at least one updater with the same ATINDEX value or delete the
particular extractor-receiver pair.
volume-name
is the name of the image trail’s volume
subvolume-name
is the name of the image trail’s subvolume.
Cause. The COPYAUDIT command could not find any image files on the remote
image trail. This problem indicates that the receiver’s RETAINCOUNT value was
probably not set high enough and that, as a result, some image files on the remote
system were purged.
Effect. The COPYAUDIT command aborts.
Recovery. There is no recovery action. The COPYAUDIT command cannot be
executed because image files needed for this command were already purged from the
remote system.
Cause. The RDF configuration file is invalid.
Effect. The validation fails.
Recovery. Alter the configuration to include the monitor.
Cause. A NEWPROCESS error occurred during START RDF or TAKEOVER
processing.
No VOLUMES are configured for ATINDEX atindex
No image files could be found in the imagetrail on volume-
name.subvolume-name
No MONITOR is Configured
No PCB available