RDF/IMP and IMPX System Management Manual (RDF 1.4+)
Messages
HP NonStop RDF/IMP and IMPX System Management Manual—524388-001
C-98
RDFCOM Messages
Effect. The COPYAUDIT command aborts.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting file-system errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the COPYAUDIT command. Otherwise, contact your service provider.
primary-system
is an RDF system name.
Cause. The network master network record does not have the specified primary
system name.
Effect. Validation fails.
Recovery. You must reconfigure your network master.
node
is the name assigned to both the primary and backup nodes.
Cause. The RDF configuration file is invalid: both primary and backup node names
are identical.
Effect. The validation fails.
Recovery. Alter the RDF configuration to reflect different names for these two nodes.
error#
is the error number that identifies the specific error.
Cause. A NEWPROCESS error occurred during START RDF or TAKEOVER
processing.
Effect. The START RDF or TAKEOVER operation is aborted.
Recovery. Refer to the Operator Messages Manual for a description of the error code.
For additional details about understanding and correcting process errors, see the
Guardian Procedure Errors and Messages Manual. If possible, correct the error and
reenter the command that encountered the error. Otherwise, contact your service
provider.
Primary node in network master record is incorrect primary-
system
PRIMARYSYSTEM (\node) and BACKUPSYSTEM (\node) are the same
Process Name Error: error#