RDF/IMP, IMPX, and ZLT System Management Manual

Entering RDFCOM Commands
HP NonStop RDF/IMP, IMPX, and ZLT System Management Manual—524388-002
8-32
Command Overview
Where Issued
Primary or backup system.
Security Restrictions
None; anyone can enter the INFO command.
RDF State Requirements
You can enter the INFO command any time after RDF has been initialized.
Usage Guidelines
This command retrieves its information from the RDF configuration file.
Output Displayed
The parameters displayed for the RDF global options, secondary image trails, and the
individual processes are explained under the SET IMAGETRAIL, SET RDF, SET
MONITOR, SET EXTRACTOR, SET RECEIVER, SET RDFNET, SET NETWORK,
SET PURGER, and SET VOLUME command descriptions.
Examples
Examples of several INFO commands follow.
INFO * Command
To display all current RDF configuration parameters for both the primary and backup
systems, enter:
]INFO *
RDF displays the currently configured RDF parameter values in the following manner:
RDF SOFTWARELOC $SYSTEM.RDF
RDF BACKUPSYSTEM \TORONTO
RDF CONTROL SUBVOLUME SANFRAN
RDF LOGDEVICE $0
RDF LOGFILE $0
RDF PRIMARYSYSTEM \SANFRAN
RDF UPDATERDELAY 10
RDF UPDATERTXTIME 10
RDF UPDATERRTDWARNING 60
RDF UPDATEROPEN PROTECTED
RDF NETWORK OFF
RDF NETWORKMASTER OFF
RDF UPDATEREXCEPTION OFF
RDF REPLICATEPURGE OFF