RDF/IMP, IMPX, and ZLT System Management Manual

Entering RDFCOM Commands
HP NonStop RDF/IMP, IMPX, and ZLT System Management Manual—524388-002
8-80
Command Overview
Where Issued
Primary or backup system.
Security Restrictions
None; anyone can issue the SHOW command.
RDF State Requirements
You can enter the SHOW command at any time.
Usage Guidelines
This command retrieves information from the RDF configuration memory table, which
serves as an input buffer for a subsequent ADD command.
If you have not yet issued any SET commands for the specified object, or have issued
a RESET command for it, the SHOW command displays the default option values for
the object.
If you want to see what parameter values are already set in the configuration file, use
the INFO command.
Output Displayed
The parameters displayed for the RDF global options and the individual processes are
explained under the SET EXTRACTOR, SET IMAGETRAIL, SET MONITOR, SET
NETWORK, SET PURGER, SET RDF, SET RDFNET, SET RECEIVER, and SET
VOLUME command descriptions.
Examples
Examples of several SHOW commands follow:
SHOW RDF Command
To display the global configuration parameter values specified by a series of SET RDF
commands, enter:
]SHOW RDF
In response, RDFCOM displays something such as the following:
RDF SOFTWARELOC $SYSTEM.RDF
RDF LOGDEVICE $0
RDF LOGFILE $0
RDF PRIMARYSYSTEM \RDF06
RDF UPDATERDELAY 10
RDF UPDATERTXTIME 60