RDF/IMP, IMPX, and ZLT System Management Manual

Entering RDFCOM Commands
HP NonStop RDF/IMP, IMPX, and ZLT System Management Manual—524388-002
8-93
Command Overview
If RDFCOM cannot connect to a particular process, RDFCOM displays dots (...) in the
RTD Time, Sequence, and Rel Byte Addr fields and an appropriate File System error
number in the Error field.
Special Messages
If you issue the STATUS RDF command while an RDF TAKEOVER operation is in
progress, RDF displays the current state as “TAKEOVER IN PROGRESS.”
If you issue the STATUS RDF command after an RDF TAKEOVER operation has
completed, RDFCOM displays the following message instead of the usual status
display:
STATUS RDF (\RDF04 -> \RDF06) is NOT running
An RDF TAKEOVER has completed
Safe MAT position is SNO 1, RBA 87876660
MAT position for File Recovery: SNO 1, RBA 87876740
Examples
To display current RDF configuration information and operational statistics once, enter
the following command:
]STATUS RDF
To display that information 10 times, once every minute, enter:
]STATUS RDF, PERIOD 60, COUNT 10
To display current information and statistics for all configured extractor processes
once, enter the following command:
]STATUS EXTRACTOR
To display current information and statistics for only those processes (the extractors or
any updater) that have fallen behind the configured RTD threshold (rtd-time), enter the
following command:
]STATUS RTDWARNING