RDF/IMP, IMPX, and ZLT System Management Manual

Messages
HP NonStop RDF/IMP, IMPX, and ZLT System Management Manual—524388-002
C-28
RDF Messages
Effect. The extractor will begin reading TMF audit data and transmitting it to the
receiver.
Recovery. Informational message only; no corrective action is needed.
775
Cause. The extractor has encountered a restart condition during an online database
synchronization operation, and the current audit trail restart position sent by the
receiver may lead to loss of data.
Effect. The extractor revises its restart location to an earlier point in the audit trail,
thereby guaranteeing that no data will be lost.
Recovery. Informational message only; no corrective action is needed.
776
Cause. The receiver has terminated normal processing as the result of a STOP TMF,
STOP RDF, or TAKEOVER command.
Effect. Normal RDF shutdown processing continues.
Recovery. Informational message only; no corrective action is needed.
777
Cause. The extractor has received a STOP SYNCH message, but is not currently
involved in an online synchronization operation.
Effect. The extractor abends.
Recovery. This is an internal error. If no database synchronization operation was in
progress, you must restart RDF. If a database synchronization operation was in
progress, you must restart the entire operation from the beginning.
778
Cause. The updater has terminated normal processing as the result of a STOP TMF,
STOP RDF, STOP UPDATE, or TAKEOVER command.
Restart position adjusted for database synchronization
Remote RDF receiver shutdown complete
Unexpected STOP SYNCH message received
Remote RDF updater shutdown complete