RDF/IMP, IMPX, and ZLT System Management Manual

Messages
HP NonStop RDF/IMP, IMPX, and ZLT System Management Manual—524388-002
C-38
RDF Messages
Effect. RDF stops updating the backup database.
Recovery. Informational message only; no corrective action is needed.
809
Cause. The operator issued a STOP RDF command.
Effect. The RDF process stops normally.
Recovery. Informational message only; no corrective action is needed.
810
timestamp
is the time of the shutdown.
Cause. The operator issued a TMFCOM STOP TMF command at the primary node.
Effect. The RDF process stops normally.
Recovery. Informational message only; no corrective action is needed.
811
Cause. The operator issued a TAKEOVER command.
Effect. RDF starts a TAKEOVER operation.
Recovery. Informational message only; no corrective action is needed.
812
error
is the file-system error number that identifies the specific error.
procname
is the name of the process with which the updater cannot communicate.
Shutting down in response to STOP RDF
Shutting down in response to STOP TMF, timestamp timestamp
RDF TAKEOVER initiated
Error error communicating with procname