RSC/MP 7.2 Messages Manual

HP NonStop Remote Server Call (RSC/MP) Messages Manual—522359-004
2-1
2
Messages Reported From the Host
This section describes the messages reported from the NonStop host according to
base values and describes their cause, effect, and recovery procedure. To learn more
about host messages and recovery from data communications failures, see the
Remote Server Call (RSC/MP) Programming Manual.
Host messages have the format:
date time TDP:process-name:object-type:[object-name]:msg-id msg-text
where the parameters are defined as:
For example, this message displays message number 2803, which indicates that the
TERM object in the TDP, named TERM05, has stopped:
0110
Cause. An internal programming error has been detected.
Effect. None.
Recovery. This message is informational only.
0400
Cause. The backup process has been initiated in the specified CPU.
Effect. None.
Recovery. This message is informational only. No corrective action is necessary.
date time The current date and time.
process-name The name of the process reporting the message.
object-type The type of TDP object: for example, PIPE or TERM.
object-name The name of the TDP object, as shown in the RSC.INI file.
msg-id The internally generated numeric message ID. (This message is
for HP use only.)
msg-text The text of the message.
2001-1-30 14:30:13 TDP:$TDPA:TERM:TERM05:2803 TERM stopped.
Finite state machine: action: <action>, state: <state>.
Backup started in CPU <cpu>.