RSC/MP 7.2 Messages Manual

Messages Reported From the Host
HP NonStop Remote Server Call (RSC/MP) Messages Manual—522359-004
2-20
2807
Cause. The TERM object received a message that it could not recognize.
Effect. The TERM object attempts to return an error to the workstation.
Recovery. This problem indicates a serious network hardware or protocol problem.
Report the problem to your network administrator.
2810
Cause. An unsolicited message was rejected because too many unsolicited messages
are outstanding. This error is sent back to the sender of a UMS WRITE or
WRITEREAD call.
Effect. Unsolicited messages are not delivered to the workstation.
Recovery. Check the number of unsolicited messages on the workstation. You can
end the session to clear the queue for unsolicited messages.
2811
Cause. An unsolicited message was rejected because it could not be delivered to the
terminal.
Effect. The message is not delivered, and an error is returned to the sender if
appropriate.
Recovery. Determine the cause of the error and correct it before restarting the
workstation application.
2812
Cause. An unsolicited message was rejected because of invalid size – less than 0 or
greater than 56000.
Effect. The message is not delivered, and an error is returned to the sender if
appropriate.
Protocol violation. A message was received which could not
be interpreted. Data: [ <message data> ].
[<session id>] Unsolicited message rejected, UMS queue limit
of <count> entries has been reached.
[<session id>] Unsolicited message rejected, I/O Type is
<type>, Error 2811.
Unsolicited message rejected, I/O Type is <type>, Invalid
<reqrep> size <size>.