RSC/MP 7.2 Messages Manual

Messages Reported From the Host
HP NonStop Remote Server Call (RSC/MP) Messages Manual—522359-004
2-33
3050
Cause. The hexadecimal value supplied for the attribute is out of the valid range.
Effect. The command is rejected.
Recovery. Supply a valid hexadecimal value for the attribute.
3051
Cause. The command has an unrecognized argument.
Effect. The command is rejected.
Recovery. Supply a correct argument or delete an excess argument.
3052
Cause. <n> is the total number of named objects configured. This message is not
logged. A STATUS object type * command reports this message to the RSCCOM
utility.
Effect. None.
Recovery. This message is informational only.
3055
Cause. An attempt to alter operation of a TDP has been made by a user who is not
privileged.
Effect. The command is rejected.
Recovery. See the Remote Server Call (RSC/MP) Programming Manual for a
discussion of RSC security.
*** Error 3050: '<attribute>' must be at least hex <minimum
value> but not more than <maximum value>.
*** Error 3051: Argument <‘invalid argument’> is invalid.
<n> <object type> objects have been configured.
*** Error 3055: Security violation - insufficient privilege
to execute command <command 'n'>.