RSC/MP 7.2 Messages Manual

Messages Reported From the Host
HP NonStop Remote Server Call (RSC/MP) Messages Manual—522359-004
2-39
6506
Cause. The client requested a normal shutdown and a connection reset.
Effect. The socket was closed and the workstation has disconnected the session with
the TDP.
Recovery. Fix your network or your application.
6507
Cause. A retryable error occurred on the socket.
Effect. The Send or Receive operation was retried by the TDP. If errors continue, the
TCPIPPORT object might be aborted.
Recovery. This message is informational only. No corrective action is necessary.
6801
Cause. An internal program error has been detected.
Effect. The object that reported the error might be in an invalid state.
Recovery. Abort and restart the object. If the object is not accessible through
RSCCOM, restart the TDP. Record the message text and report it to your HP Global
Customer Support Center (GCSC).
6802
Cause. The operational state of the object has changed to STARTED. See the
RSCCOM START command in the Remote Server Call (RSC/MP) Installation and
Configuration Guide for more information.
Effect. None.
Recovery. This message is informational only. No corrective action is necessary.
A connection reset on socket <socket> was issued by the
client.
Retryable Error <Error> on socket <socket> occurred during a
<'SEND' | 'RECEIVE'> attempt.
TCPIPPORT state table error ... Event <event id>, Action
<action id>, State <state id>.
TCPIPPORT started.