RSC/MP 7.3 Installation and Configuration Guide

NetBIOS Network Interface Configuration
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011
8-3
Network Interface Section ([NIF-nifname])
AdapterNumber Option
The AdapterNumber option defines the network adapter number used by the NIFNB.
Although there may only be one physical adapter in your system, your NetBIOS
interface may use a logical adapter number to indicate the network protocol that the
NetBIOS interface should use. Make certain you are using the correct logical adapter
number. See your System Administrator for the number of the logical adapter.
number
A valid adapter number.
Required: No
Default: 0
Platforms: All
Example:
AdapterNumber=0
ArpRetries Option
The ArpRetries option defines the number of retries for the ARP broadcast message.
This option is only used with installations that use ARP.
number
An integer in the range from 0 through 65535.
Required: No
Default: 2
Platforms: All
Example:
ArpRetries=4
AdapterNumber=number
Note. Do not alter this value unless instructed to do so by HP Global Customer Support
Center (GCSC).
ArpRetries=number