RSC/MP 7.3 Installation and Configuration Guide

IPX/SPX Network Interface Configuration
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011
10-4
Network Interface Section ([NIF-nifname])
EnableProtocolKeepAlives Option
The EnableProtocolKeepAlives option determines whether the protocol-specific
keepalive mechanism should be enabled. If enabled, this option increases network
traffic.
enabled
YES to enable, NO to disable.
Required: No
Default: NO (disabled)
Platforms: All
Example:
EnableProtocolKeepAlives=YES
IdleDisconnect Option
The IdleDisconnect option specifies the number of seconds that a physical network
connection will be maintained when no logical pipes are using the connection.
number
The number of seconds as an integer in the range 5 through 65535.
Required:No
Default:60 seconds.
Platforms:All
Example:
IdleDisconnect=10
EnableProtocolKeepAlives=enabled
IdleDisconnect=number