RSC/MP 7.3 Installation and Configuration Guide

IPX/SPX Network Interface Configuration
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011
10-8
Network Interface Section ([NIF-nifname])
ProgramFile Option
The ProgramFile option specifies the program file that should be run for this NIF. For
SPX network interfaces, this value must be NIFNVL.
Required: Yes
Default: None
Platforms: All
Example:
ProgramFile=nifnvl
SPXName Option
The SPXName option specifies the name which will be concatenated with the
DomainName used to broadcast to the Novell bindary service as an SPX service.
string
The SPXName name as a character string only containing letters and digits. This
alphanumeric name is case insensitive. When concatenated with the
DomainName, it cannot exceed 42 characters in total.
Required: No
Default: None (will broadcast listen using the SystemName if no SPXName is
specified).
Platforms: All
Example:
SPXName=nifnvl2
ProgramFile=nifnvl
SPXName=string