RSC/MP 7.3 Installation and Configuration Guide

RSCCOM Command Reference
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-010
13-22
STATUS Command
STATUS Command
The STATUS command displays the functional state of an object.
type
The type of TDP object.
name
The name of the object for which to display status information.
DETAIL
An optional attribute of the STATUS command that provides details of the
functional aspects of the specified object. Detailed status reports are shown later in
this section. A detailed TERM object status report is shown on page 13-25.
*
Displays the status for all objects of this type.
UMS REPSIZE The total number of bytes that this TERM object has handled
for UMS replies (from workstation applications) since reset-
time.
TMF TRANSACTIONS
STARTED
The total number of transactions initiated by this TERM object.
TMF TRANSACTIONS
COMMITTED
The total number of transactions committed by this TERM
object.
TMF TRANSACTIONS
ABORTED
The total number of transactions aborted by this TERM object.
SERVER RESPONSE
TIME - MINIMUM
The shortest elapsed time for an RSC message received by
this object since the last “reset” command
SERVER RESPONSE
TIME - AVERAGE
The average elapsed time for the all RSC messages received
since the last “reset” command
SERVER RESPONSE
TIME - MAXIMUM
The longest elapsed time for an RSC message received by
this object since the last “reset” command
Note. A greater than symbol (>) for a statistical value indicates that the value exceeded a
maximum for the accumulator and that the accumulator wrapped to zero.
STATUS type name [ DETAIL ]
STATUS type * [ DETAIL ]