RSC/MP 7.3 Installation and Configuration Guide

RSCCOM Command Reference
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-010
13-28
TDP Object Attributes and Configuration Notes
TDP Object Attributes and Configuration Notes
ACS Object Attributes
Table 13-1. ACS Object Attributes
Example — attribute settings for the ACS object:
Attribute Name Description
ACSSERVERCLASS
The valid Pathway server class name of an ACS server
that is running in a Pathway environment. If blank, then the
ACS server is not running in a Pathway environment. If
specified, then the Pathmon name must be set in the
ACSPROCESSNAME attribute. The default is no ACS
server class name.
The ACS object must be in the STOPPED state before
using the ALTER command with the ACSSERVERCLASS
attribute.
ACSPROCESSNAME
This attribute must be assigned a value, either:
•
A valid Guardian process name for an ACS server if
the ACSSERVERCLASS is blank.
or
•
The name of the Pathmon in which the serverclass,
identified by ACSSERVERCLASS, is running.
The ACS object must be in the STOPPED state before
using the ALTER command with the ACSPROCESSNAME
attribute
RECVWRITEREADS
An attribute that specifies whether all WriteRead requests
are to be sent from the TDP to the ACS server for security
validation. If the value is YES, then all WriteRead requests
received by the TDP are sent to the ACS. If the value is
NO, then the TDP does not send WriteReads to the ACS
server.
The ACS object must be in the STOPPED state before
using the ALTER command with the RECVWRITEREADS
attribute
ACSSERVERCLASS ACSSVR
ACSPROCESSNAME $RSC-PN
RECVWRITEREADS NO