RSC/MP 7.3 Installation and Configuration Guide

RSCCOM Command Reference

HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-010

13-29

PIPE Object Attributes

For PIPE objects, the object name must be unique in the TDP, but does not need to be

unique on the host or on the network. Piccolo distributes connections across PIPE

objects of the same name in the same host. The name must match the first portion of

the HOST_PIPENAME option on the workstation.

Table 13-2. PIPE Object Attributes

Attribute Name Description

AUTORESTART

The number of seconds to wait before automatically restarting a

PIPE object that was aborted because of an error. The default

value is 30 seconds. Use the SET AUTORESTART command to

automatically restart an aborted PIPE object.

You can alter the AUTORESTART attribute without the PIPE

object being in the STOPPED state.

KEEPALIVE

The number of seconds between attempts by Piccolo to verify

that the connection remains active. The value may be from zero

(disabled) to 360000 seconds (100 hours). Low values for

KEEPALIVE may burden networks with verification messages.

By default, KEEPALIVE is disabled (0).

The PIPE object must be in the STOPPED state before using

the ALTER command with the KEEPALIVE attribute

LOGEVENTS

The type of logging event. This attribute is used primarily for

RSC/MP development and debugging and is subject to change.

You can use the LOGEVENTS attribute without the PIPE object

being in the STOPPED state.