RSC/MP 7.3 Installation and Configuration Guide

RSCCOM Command Reference
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-010
13-32
TERM Object Attributes.
Example — attribute settings for a TERM object:
LOGEVENTS
Used for logging events. Logging choices are ACSALLOW,
ACSREJECT, CONNECTION, DIAGNOSTIC, MEMORY,
SESSION, TMF, MESSAGE, or ALL. See the TERM Object
Event Types on page 12-9 for a definition of these categories.
You can alter the LOGEVENTS attribute without the TERM
object being in the STOPPED state.
PWYPATHMON
The default PATHMON to use for Pathsend sessions for this
terminal. This attribute must be a valid Guardian process name.
The default is $RSC.
The TERM object must be in the STOPPED state before using
the ALTER command with the PWYPATHMON attribute.
PWYTIMEOUT
The number of seconds to wait for the Pathway terminal
supporting the IDS session to start up. The minimum value is 30
seconds and the maximum value is 120 seconds. If a value is
not specified, the default value is 30 seconds.
TEMPLATE
A YES or NO value which indicates whether this terminal is a
terminal template. A terminal template is used for the
configuration of dynamic terminals and cannot service static
terminal connections.When the TDP receives a connection
request from the workstation, the TDP uses a template
configuration to start a dynamic terminal. You cannot use the
START command to start a template from RSCCOM.
The TERM object must be in the STOPPED state before using
the ALTER command with the TEMPLATE attribute.
PWYPATHMON $RSCP
IDSPATHMON $RSCP
IDSTCP RSC-TCP
IDSTCLPROG $SYSTEM.ZRSCHOST.IDS
IDSINITIAL IDS-SAMPLE
PWYTIMEOUT 30
ACSERVER None
TEMPLATE No
Table 13-3. TERM Object Attributes (page2of2)
Attribute Name Description