RSC/MP 7.3 Installation and Configuration Guide

Installation Troubleshooting
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011
B-3
Step 2. Determine if the Communications Transport
is Functional
3. Compare the results of the commands above to the RSC/MP host and client
softdocs to verify that compatible RSC/MP software is running on the NonStop
host and the workstation.
Step 2. Determine if the Communications Transport is
Functional
Use a tool provided by the communications transport provider, such as PING for
TCP/IP or start a TACL or an async line to verify that the network is working correctly.
Step 3. Check the Piccolo Configuration Files
The Piccolo Configuration Check program reports errors that are not detected by the
Piccolo subsystem. The Piccolo subsystem searches for specific options in specific
sections; the Piccolo Configuration Check program analyzes each entry to detect:
•
Unrecognized options
•
Options in the wrong section
•
Options that have missing or incorrect data
•
NIFs referenced but not configured
•
Required elements that are not specified
Use the Piccolo Configuration Check program (pcfgchk) to verify that the Piccolo
configuration files on the host and workstation do not contain incorrect data.
1. On the host, enter this command at the TACL prompt:
> run pcfgchk
which should produce output similar to the following (line numbers and sections
processed will vary depending on the data in the Piccolo Configuration file):
Piccolo Configuration Check Program - T9711V70 - (28SEP2003) -
4.0.0/001 - NonStop
Copyright (c) 1994-2003 Cornerstone Software, Inc. All rights
reserved.
Checking configuration file $system.zrschost.pipeini
Processing section [pipeman]
Processing complete for section [pipeman], (Lines 1 - 11).
Processing section [nif-tcp]
Processing complete for section [nif-tcp], (Lines 12-13).
Final processsing...
....processing complete.