RSC/MP 7.3 Installation and Configuration Guide

Installation Troubleshooting

HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011

B-8

Step 8. Check the Status of the Components

Check the status of the RSC/MP Transport components:

> pipecp status nif

NIF name Type Process Pri Links Address

--------------------------------------------------------------------

nif01 TCP/IP 4c4 10 0 10.1.70.5 (port 2787)

> pipecp status

System Address: mysys.mydomain.com

Version: T7981V62 - (30SEP2001) - 3.2.0/001 - Win32

Configuration File: C:\RSC\bin\pipe.ini

License Mode: Runtime

License Code: None

Log File Name: pipelog

Log Level: 2

Clients: 0

Network Interfaces: 0 inbound, 0 outbound

Links: 0

Pipes: 0 connected, 0 active open, 0 passive open

Step 9. Run Your RSC/MP Application

If the RSC/MP test program worked correctly, run your RSC/MP-based application.

Step 10. Turn on Additional Logging

If the preceding steps are not sufficient to resolve the cause of an error, you must

gather additional information. RSC/MP provides several points to collect logging

information. HP Global Customer Support Center (GCSC) may request these and will

describe how to collect them. For more information about logging, see How to Use

Logging on page B-9.