RSC/MP 7.3 Installation and Configuration Guide

Installation Troubleshooting

HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011

B-13

TDP Logging

Enabling TDP logging is a two step process:

1. A log file must be opened.

2. The PIPE and/or TERM object logging attributes must be selected.

You can use the following RSCCOM commands to enable TDP logging:

See TDP Logging on page 12-6, for more information about TDP logging. Section 13,

RSCCOM Command Reference, describes the RSCCOM commands in further detail.

RSCCOM Command Description

LOGOPEN $s.#tdplog The log file can be a spooler file, an

unstructured Enscribe file, or a

terminal ID.

ALTER PIPE rsc LOGEVENTS ALL ALL could be replaced by one or

more of the individual event types

listed under PIPE Object Event

Types on page 12-9.

ALTER TERM term01 LOGEVENTS ALL ALL could be replaced by one or

more of the individual event types

listed under TERM Object Event

Types on page 12-9.