RSC/MP 7.3 Installation and Configuration Guide

Best Practices Guide
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011
F-4
Scenario 1
°
Multiple NIFs on different network adapters (see Figure F-3). In this case,
you must give each PIPEMAN instance a unique SystemName. From the
workstation’s perspective, each Piccolo instance on the host appears to be
a different host. Configure the DNS server to give the correct IP addresses
for the network adapters being used, according to the names configured in
Piccolo. The example shown in the diagram includes two groups of
workstations, “A” and “B”, which connect to logical (Piccolo) HOST1A and
HOST1B. The DNS server should be configured to map HOST1A and
HOST1B to the proper IP addresses; or alternatively, the Piccolo
[RESOLVER] section can be used on the workstations.
Figure F-2. Scenario 1 improved with NIFs on the same network adapter
Network
Servers
Servers
Servers
NonStop host
HOST1
CDT013
PIPEMAN
Application
NIF
RSCPIPE
workstation
(group “B”)
TCP/IP
workstation
(group “A”)
PIPEMAN
Application
NIF
TCP/IP
RSCPIPE
10.1.90.20
PIPEMAN
NIF
TDP
PIPEMAN
NIF
TDP
port
5002
port
5001
$ZTC0
port
5001
port
5002