RSC/MP 7.3 Installation and Configuration Guide

Installing RSC/MP on Windows Workstations
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011
4-2
Installing the Win32+TSE Client from CD
workstation and locate the RPW32EXE.EXE file on the central workstation.
Either double-click on the RPW32EXE.EXE file, type RPW32EXE.EXE at a
DOS prompt, or select Start->Run and enter the full path of the
RPW32EXE.EXE file.
c. Transfer the RPW32EXE.EXE file to the NonStop and then transfer
RPW32EXE.EXE to the target workstation. The file must be transferred in
BINARY mode. Log on to the workstation and locate the RPW32EXE.EXE file.
Either double-click on the RPW32EXE.EXE file, type RPW32EXE.EXE at a
DOS prompt, or select Start->Run and enter the full path of the
RPW32EXE.EXE file.
4. The files after extraction are listed in subsection Files Installed on the Windows
Workstation on page 4-5.
Installing the Win32+TSE Client from CD
To install the Win32+TSE client software from the CD:
1. Insert the RSC/MP Win32+TSE Client CD into a drive attached to a Windows
workstation.
2. Navigate to the WS_SW folder on the CD.
3. Select one of these installation methods:
a. Install directly onto the workstation attached to the CD drive by double-clicking
on the RPTSEEXE.EXE file.
b. Install on multiple workstations by copying the RPTSEEXE.EXE file to a central
workstation that can be accessed by all workstations. Log on to each
workstation and locate the RPTSEEXE.EXE file on the central workstation.
Either double-click on the RPTSEEXE.EXE file, type RPTSEEXE.EXE at a
DOS prompt, or select Start->Run and enter the full path of the
RPTSEEXE.EXE file.
c. Transfer the RPTSEEXE.EXE file to the NonStop and then transfer
RPTSEEXE.EXE to the target workstation. The file must be transferred in
BINARY mode. Log on to the workstation and locate the RPTSEEXE.EXE file.
Either double-click on the RPTSEEXE.EXE file, type RPTSEEXE.EXE at a
DOS prompt, or select Start->Run and enter the full path of the
RPTSEEXE.EXE file.
4. When the installation program asks the question “Do you want RSC to run as a
Service?”, answer Yes. See Running the RSC/MP Win32+TSE Client as a Service
on page 4-9.
5. The files after extraction are listed in subsection Files Installed on the Windows
Workstation on page 4-5.