RSC/MP 7.3 Installation and Configuration Guide

Configuring the RSC/MP Transport (Piccolo)
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011
5-27
Pipeman Section ([PIPEMAN])
Examples:
1. This example causes critical level messages to be logged:
LogLevel=0
2. This example causes critical, error, warning, and informational messages to be
logged:
LogLevel=7
(Note that 7 is the sum of 0, 1, 2, and 4, which represent critical, error, warning
and informational messages, respectively.)
NifGuardTime Option
The NifGuardTime option defines the NIF guard time interval in seconds.
NifGuardTime is the amount of time Pipeman waits before trying to restart a NIF that is
slow to start up or cannot start due to a resource failure. This option prevents Pipeman
from unnecessarily restarting a NIF that takes a longer time to register with Pipeman.
interval
The number of seconds, as an integer from 0 through 65535.
Required: No
Default: 15
Platforms: All
Example:
NifGuardTime=20
Note. If the LogFileName option is set, logging of critical errors cannot be suppressed.
Note. Do not alter this value unless instructed to do so by HP Global Customer Support
Center (GCSC).
NifGuardTime=interval