RSC/MP 7.3 Installation and Configuration Guide

Configuring the RSC/MP Transport (Piccolo)
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration Guide—522358-011
5-33
Pipeman Section ([PIPEMAN])
SystemName Option
This option defines the name of the local system.
string
The system name and domain name (see DomainName Option on page 5-21) are
concatenated to form the system address, which can be no more than 46
characters in length. The SystemName may contain only the following characters:
A through Z, a through z, 0 through 9, and hyphen (-). The name is not case
sensitive and must be unique within the domain.
On Windows systems equipped with a network interface card, this option can be
omitted and a system name will be assigned when Piccolo starts. The assigned
system name is a string of 12 hexadecimal digits that represent the Media Access
Controller (MAC) address of the network interface card. If your Windows system
does not have a network interface card and the system name is assigned at
Piccolo start time because the SystemName option is not set, the assigned value
is not guaranteed to be unique. (Note: this applies to systems configured to use
Windows network dial-up networking that may not have a network interface card).
Required: Windows: No
UNIX and NonStop: Yes
Default: Windows: string of 12-hexadecimal digits representing the MAC address
of the network interface card.
UNIX and NonStop: None
Platforms: All
Examples:
Valid system names:
1. mysystem
2. MySystem
3. System-72
Invalid system names:
1. This example contains an invalid character +:
My+System
2. This example contains a period:
Joes.PC
SystemName=string