RSC/MP Installation and Configuration Guide

Configuring and Managing the RSC/MP TDP
Process
Running Processes at High PINs
Running Processes at High PINs
All RSC/MP processes are compatible with High PINS . The TDP process can accept
opens and requests from TCPs, UMS requesters, and other Guardian processes that
run with HIGHPIN ON, regardless of whether the TDP itself is configured to run with
HIGHPIN ON.
Configuring TDP Objects
The TDP is composed of objects (ACS, PIPE, and TERM) that are referenced and
controlled individually through RSCCOM. At a minimum, you will need:
One PIPE object.
If you are using dynamic TERM objects, you will need at least one TERM template.
If you are using static TERM objects, you will need one object for each workstation.
See Section 11, RSCCOM Command Reference, for descriptions of the RSCCOM
commands.
The number of TDP objects depends on the number of workstations and the type and
total number of transports needed. You must configure a TERM object for each
workstation (if using static TERM names) and a communications object for each
communication end point (for example, PIPE object) that the TDP must support.
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration G uide — 52235 8- 013
10-4