RSC/MP Installation and Configuration Guide

RSCCOM Command Reference STATUS Command
UMS REPSIZE The total number of bytes that this TERM object has handled
for UMS replies (from workstation applications) since reset-
time.
TMF TRANSACTIONS
STARTED
TMF TRANSACTIONS
COMMITTED
TMF TRANSACTIONS
ABORTED
SERVER RESPONSE
TIME - MINIMUM
SERVER RESPONSE
TIME - AVERAGE
SERVER RESPONSE
TIME - MAXIMUM
The total number of transactions initiated by this TERM object.
The total number of transactions committed by this TERM
object.
The total number of transactions aborted by this TERM object.
The shortest elapsed time for an RSC message received by
this object since the last ―reset‖ command
The average elapsed time for the all RSC messages received
since the last ―reset‖ command
The longest elapsed time for an RSC message received by
this object since the last ―reset‖ command
Note. A greater than symbol (>) for a statistical value indicates that the value exceeded a
maximum for the accumulator and that the accumulator wrapped to zero.
STATUS Command
The STATUS command displays the functional state of an object.
STATUS type name [ DETAIL ]
STATUS type * [ DETAIL ]
type
The type of TDP object.
name
The name of the object for which to display status information.
DETAIL
An optional attribute of the STATUS command that provides details of the
functional aspects of the specified object. Detailed status reports are shown later in
this section. A detailed TERM object status report is shown on page 11-24.
*
Displays the status for all objects of this type.
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration G uide — 52235 8- 013
11- 22