RSC/MP Installation and Configuration Guide

Best Practices Guide Scenario 1
Figure E-2. Scenario 1 improved with NIFs on the same network adapter
workstation
(group “B”)
workstation
(group “A”)
NonStop host
HOST1
Application Application
S er v er s
Servers
S er v er s
RSCPIPE RSCPIPE
TDP TDP
PIPEMAN PIPEMAN
PIPEMAN PIPEMAN
NIF
port
NIF
port port
NIF NIF
port
TCP/IP
5002
TCP/IP
5001
5001
$ZTC0
5002
10.1.90.20
Network
CDT013
Multiple NIFs on different network adapters (see Figure E-3). In this case,
you must give each PIPEMAN instance a unique SystemName. From the
workstation‘s perspective, each Piccolo instance on the host appears to be
a different host. Configure the DNS server to give the correct IP addresses
for the network adapters being used, according to the names configured in
Piccolo. The example shown in the diagram includes two groups of
workstations, ―A‖ and ―B‖, which connect to logical (Piccolo) HOST1A and
HOST1B. The DNS server should be configured to map HOST1A and
HOST1B to the proper IP addresses; or alternatively, the Piccolo
[RESOLVER] section can be used on the workstations.
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration G uide — 52235 8- 013
E -4