RSC/MP Installation and Configuration Guide

RSC/MP Quick Start Guide Testing the RS C/MP Installation
Testing the RSC/MP Installation
To test the RSC/MP installation:
1. Start the transport by using the PIPECP START command.
2. Run the RSCTESTW program.
3. When the RSC/MP Diagnostic Test Utility window appears, click on the Start
button. The test program is set to use a Guardian named process and should run
without making any modifications to the options.
4. If the test program connects and sends messages between the client and server,
RSC/MP is installed correctly.
5. To stop the test, click on the Stop button.
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration G uide — 52235 8- 013
2 -6