RSC/MP Installation and Configuration Guide

Installing RSC/MP on the Host Files Installed on the RSC/MP Host
8. Obtain the name of the current EMS template files. You will need this information if
you want to restore the original system templates. See the DSM Template Services
Manual or the EMS Messages Manual for more information.
9. Run the command RUN TMPLMRG to merge the RSC/MP EMS templates into the
system template files. After this procedure has completed, the files in Files
Installed on the RSC/MP Host on page 3-2 will have been created or modified.
10. To restore the unmerged EVENTTD file, rename $SYSTEM.SYSTEM.EVENTOLD
to EVENTTD.
11. To restore the unmerged EMS template files, run $SYSTEM.SYSTEM.COUP or
$SYSTEM.SYSTEM.SCF to assign the templates to the name of the EMS
template file that you obtained in Step 8.
Files Installed on the RSC/MP Host
The following table lists the files that are copied onto the host system during the
RSC/MP installation.
Note. Any changes to this list appear in the softdoc that comes with each RSC/MP version.
Table 3-1. Files Installed on the RSC/MP Host (page 1 of 3)
RSC/MP Host
Location
File Name
Description
Required for
product
use?
ZRSCHOST
ADVTMPL
RSC/MP EMS advisory text
compiled templates
no
IDSCOD
Sample SCOBOL IDS requester
program file.
no
IDSDIR
Sample SCOBOL IDS requester
directory file.
no
IDSSAMPL
Sample SCOBOL IDS requester
source code file.
no
IDSSYM
Sample SCOBOL IDS requester
symbol file.
no
NIFNB
NetBIOS protocol network
interface
yes
1,2
NIFSOCK
TCP/IP protocol network interface
yes
1
PCFGCHK
Piccolo configuration file check
program
no
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration G uide — 52235 8- 013
3 -2