RSC/MP Installation and Configuration Guide

Contents 12. Configuring the RSC/MP Client
DELETE Command 11-15
INFO Command 11-16
RESET Command 11-17
SET Command 11-18
SHOW Command 11-18
START Command 11-19
STATS Command 11-20
STATUS Command 11-22
STOP Command 11-26
TELL Command 11-26
TDP Object Attributes and Configuration Notes 11-28
ACS Object Attributes 11-28
PIPE Object Attributes 11-29
TERM Object Attributes 11-31
12. Configuring the RSC/MP Client
RSC/MP Client Configuration and Verification 12-1
Prerequisites to Configuring RSC/MP 12-1
Basic RSC.INI Configuration 12-2
Starting the RSC/MP Transport Manager (Pipeman) 12-4
Configuring the RSC/MP I/O Manager Process (RSCPIPE) 12-4
Testing the RSC/MP Client Configuration 12-8
A. Migration to RSC/MP 7. 3
Differences Between RSC/MP 7.x and Earlier Versions A-1
Features No Longer Supported A-2
Migration Tips A-2
Migrating from RSC/MP 6.x to RSC/MP 7.3 A-3
B. Installation Troubleshooting
Notes About Diagnostic Clues B-1
How to Test the Configuration B-1
How to Trace Errors B-2
Step 1. Determine if Your RSC/MP Software is Current and Compatible B-2
Step 2. Determine if the Communications Transport is Functional B-3
Step 3. Check the Piccolo Configuration Files B-3
Step 4. Check the Host Configuration B-4
Step 5. Run the Workstation RSC/MP Test Program B-5
Step 6. Interpret the Workstation and Host Error Messages B-5
Step 7. Check the Status of the TDP Objects B-7
Step 8. Check the Status of the Components B-8
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration G uide — 52235 8- 013
v