RSC/MP Installation and Configuration Guide

Configuring the RSC/MP Transport (Piccolo) Pipeman Section ([PIPEMAN])
PRI Option
The PRI option specifies the execution priority of the Pipeman process. A process that
has a higher number will run first.
PRI=priority
priority
A valid integer in the range 1 through 199.
Required: No.
Default: For Pipeman sections: 1 less than the priority of the PIPECP that starts
Pipeman.
For NIF sections: The priority of the Pipeman process.
Platforms: NonStop
Example:
PRI=128
RingBufferSize Option
The RingBufferSize option sets the size of an internal buffer that Piccolo uses in
queuing requests from RSC/MP client and system processes to the PIPEMAN
process. The default value should be suitable for most installations.
Note. Do not alter this value unless instructed to do so by HP Global Customer Support
(GCSC).
RingBufferSize=size
size
The number of slots in the circular IPC input buffer used by the PIPEMAN process.
The valid range is an integer from 1 through 1000000.
Required: No.
Default: 8000.
Platforms: Windows (Win32+TSE client only)
Example:
RingBufferSize=12000
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration G uide — 52235 8- 013
5 -3 0