RSC/MP Installation and Configuration Guide

NetBIOS Network Interface Configuration Network Interface Section ([NIF-nifname])
DatagramQueue Option
The DatagramQueue option defines the maximum number of simultaneous NetBIOS
datagram-receives that the NIF will post to the network adapter. The NIF uses
datagrams to resolve remote system addresses. Increasing this value increases the
use of NCB resources on the network adapter. Decreasing this value may reduce
address resolution speed. This option is only used with installations that use ARP.
DatagramQueue=number
number
A number from 1 through 8.
Required: No
Default: 2
Platforms: All
Example:
DatagramQueue=1
Domain Option
The Domain option defines the suffix for the ARP name used by the network interface.
The value is concatena ted with the prefix ‗ZPIPE‘ to form the ARP name. All systems
that communicate with each other must use the same ARP name. This option is only
used with installations tha t use ARP.
Note. This option is not the same as the DomainName option in the [Pipeman] section. They
are not related.
Domain=name
name
A name of 1 through 8 alphanumeric characters.
Required: No
Default: ARP (which forms the default ARP name ZPIPEARP)
Platforms: All
Example:
Domain=DEV
HP NonStop Remote Server Call (RSC/MP) Installation and Configuration G uide — 52235 8- 013
7 -5