RSC/MP Messages Manual

Messages Reported From the Host
2806
TERM stopping.
Cause. The operational state of the object has changed to STOPPING.
Effect. None.
Recovery. This message is informational only. No corrective action is necessary.
2807
Protocol violation detected. A message was received which
could not be interpreted. Data: [ <message data> ].
Cause. The TERM object received a message that it could not recognize.
Effect. The TERM object attempts to return an error to the workstation.
Recovery. This problem indicates a serious network hardware or protocol problem.
Report the problem to your network administrator.
2810
[<session id>] Unsolicited message rejected, UMS queue limit
of <count> entries has been reached.
Cause. An unsolicited message was rejected because too many unsolicited messages
are outstanding. This error is sent back to the sender of a UMS WRITE or
WRITEREAD call.
Effect. Unsolicited messages are not delivered to the workstation.
Recovery. Check the number of unsolicited messages on the workstation. You can
end the session to clear the queue for unsolicited messages.
2811
[<session id>] Unsolicited message rejected, I/O Type is
<type>, Error 2811.
Cause. An unsolicited message was rejected because it could not be delivered to the
terminal.
Effect. The message is not delivered, and an error is returned to the sender if
appropriate.
Recovery. Determine the cause of the error and correct it before restarting the
workstation application.
HP NonStop Remote Server Call (RSC/MP) Messages Manual — 522359-006
2- 22