RSC/MP Messages Manual

Messages Reported From the Host
2812
Unsolicited message rejected, I/O Type is <type>, Invalid
<reqrep> size <size>.
Cause. An unsolicited message was rejected because of invalid size – less than 0
or greater than 56000.
Effect. The message is not delivered, and an error is returned to the sender
if appropriate.
Recovery. Determine the cause of the error and correct it before restarting the
workstation application.
3001
COM state table error ... Event <event id>, Action <action
id>, State <state id>.
Cause. An internal program error has been detected.
Effect. The object that reported the error might be in an inva lid state.
Recovery. Abort and restart the object. If the object is not accessible through
RSCCOM, restart the TDP. Record the message text and report it to your HP Global
Customer Support Center (GCSC).
3002
*** Error 3002: The TDP process must be named.
Cause. An attempt was made to start the TDP process without a Guardian process
name.
Effect. The TDP process stops.
Recovery. Supply a process name by using the NAME option in the RUN command
that is used to start the TDP.
HP NonStop Remote Server Call (RSC/MP) Messages Manual — 522359-006
2- 23