RSC/MP Messages Manual

Messages Reported From the Host
3024
*** Error 3024: '<attribute>' must be a valid file or process
name.
Cause. An invalid file or process na me was supplied for the attribute.
Effect. The command is rejected.
Recovery. Supply a va lid file or process name for the attribute.
3025
*** Error 3025: '<attribute>' must be at least <minimum
value> but not more than <maximum value>.
Cause. The value supplied for the attribute is out of the valid range.
Effect. The command is rejected.
Recovery. Supply a va lue in the valid range.
3026
*** Error 3026: '<attribute>' must be YES or NO.
Cause. The supplied attribute va lue must be YES or NO.
Effect. The command is rejected.
Recovery. Supply YE S or NO for the attribute value.
3027
*** Warning 3027: Command output has been truncated to <n>
bytes.
Cause. RSCCOM command output is limited to approximately 30,000 bytes. The
result of the command exceeded that size.
Effect. Command processing is terminated.
Recovery. Issue the command in such a way that the output size falls within the
specified limit.
HP NonStop Remote Server Call (RSC/MP) Messages Manual — 522359-006
2- 29