RSC/MP Messages Manual

API Messages
37 (0025 Hex)
The TDP you have contacted is not configured for this
terminal.
Type. Connect
Severity. Configuration
Cause. The TDP yo u have contacted is no t configured for this termina l.
Effect. The API function failed, and the workstation failed to connect to the host.
Recovery. Configure the TDP on the host for the terminal indicated by the
TERM_NAME option on the workstation, or utilize a dynamic terminal.
39 (0026 Hex)
The attempt to start a Pathway terminal to support this
session has failed.
Type. Session
Severity. Configuration
Cause. The attempt to start a Pathway termina l to support this session has failed.
Effect. The API function failed. The workstation failed to begin a session with the host.
Recovery. Check the host Pathway log for any error messages. Try increasing the
timeout value by increasing the TDP TERM attribute PWYTIMEOUT.
41 (0029 Hex)
The terminal session limit has been exceeded.
Type. Session
Severity. Configuration
Cause. The maximum number of terminal sessions (65530) has been exceeded.
Effect. The API function failed, and the workstation failed to begin a session with the
host.
Recovery. End some sessions with the host and try the operation again.
42 (002A Hex)
The specified Pathmon process is not a Pathmon process.
Type. Program
HP NonStop Remote Server Call (RSC/MP) Messages Manual — 522359-006
3- 10