Safeguard Administrator's Manual (G06.29+, H06.08+, J06.03+)
Configuration
Safeguard Administrator’s Manual—523317-029
9-2
Safeguard Attributes
At any time, you can display the current settings of the attributes by issuing the INFO
SAFEGUARD command from SAFECOM.
Table 9-1. Safeguard Attribute Default Values (page1of4)
Attribute Name Initial or Default Value
AUTHENTICATE-MAXIMUM-ATTEMPTS 3
AUTHENTICATE-FAIL-TIMEOUT 60 SECONDS
AUTHENTICATE-FAIL-FREEZE OFF
PROMPT-BEFORE-STOP
4
OFF
PASSWORD-HISTORY 0
PASSWORD-MINIMUM-LENGTH
*
6
PASSWORD-MAY-CHANGE 0
PASSWORD-EXPIRY-GRACE 0
PASSWORD-REQUIRED OFF
PASSWORD-ERROR-DETAIL OFF
PASSWORD-ENCRYPT
*
ON
CHECK-DEVICE ON
CHECK-SUBDEVICE OFF
DIRECTION-DEVICE DEVICE-FIRST
COMBINATION-DEVICE FIRST-ACL
ACL-REQUIRED-DEVICE OFF
CHECK-PROCESS ON
CHECK-SUBPROCESS OFF
DIRECTION-PROCESS PROCESS-FIRST
COMBINATION-PROCESS FIRST-ACL
ACL-REQUIRED-PROCESS OFF
CHECK-VOLUME OFF
CHECK-SUBVOLUME OFF
*
For systems running H06.06 and later H-series RVUs and G06.29 and later G-series RVUs the default value
for PASSWORD-MINIMUM-LENGTH is six and PASSWORD-ENCRYPT is ON.
**
Supported only on systems running H06.08 and later H-series RVUs and G06.29 and later G-series RVUs.
AUDIT-CLIENT-GUARDIAN is a synonym for AUDIT-CLIENT-SERVICE.
^
Supported only on systems running H06.09 and later H-series RVUs and G06.31 and later G-series RVUs.
^^
Supported
only on systems running H06.11 and later H-series RVUs and G06.32 and later G-series RVUs.
&
Supported
only on systems running J06.03 and later J-series RVUs, H06.14 and later H-series RVUs, and
G06.32 and later G-series RVUs
.
1
Supported only on systems running J06.08 and later J-series RVUs, H06.19 and later H-series RVUs, and
G06.32 and later G-series RVUs.
2
Supported only on systems running J06.10 and later J-series RVUs and H06.21 and later H-series RVUs.
PASSWORD-ERROR-DETAIL is supported only on systems running on J06.14 and later J-series RVUs and
H06.25 and later H-series RVUs.
3
Supported only on systems running H06.08 and later H-series RVUs and G06.31 and later G-series RVUs.
4
Supported only on systems running J06.16 and later J-series RVUs and H06.27, and later H-series RVUs.