Safeguard Administrator's Manual (G06.29+, H06.08+, J06.03+)

Configuration
Safeguard Administrator’s Manual—523317-029
9-12
Configuring Password Control
PASSWORD-MIN-NUMERIC-REQ, PASSWORD-MIN-SPECIALCHAR-REQ or
PASSWORD-MIN-ALPHA-REQ) must not be greater than the value of the
PASSWORD-MAXIMUM-LEN attribute.
PASSWORD-MIN-NUMERIC-REQ
Specifies the minimum number of numeric characters required in a user password
when it is set or changed.
The PASSWORD-MIN-NUMERIC-REQ attribute can have values from 0 through 8.
The initial value is 0.
The following considerations apply to the PASSWORD-MIN-NUMERIC-REQ
attribute:
•
The PASSWORD-MIN-NUMERIC-REQ attribute will take effect only when the
PASSWORD-NUMERIC-REQUIRED attribute is enabled.
•
When the PASSWORD-NUMERIC-REQUIRED attribute is changed from OFF
to ON, Safeguard sets the numeric value of the PASSWORD-MIN-NUMERIC-
REQ attribute to 1.
•
When the PASSWORD-NUMERIC-REQUIRED attribute is changed from ON
to OFF, Safeguard sets the numeric value of the PASSWORD-MIN-NUMERIC-
REQ attribute to 0.
•
The sum of the values of the effective password quality attributes (
PASSWORD-MIN-UPPERCASE-REQ, PASSWORD-MIN-LOWERCASE-REQ,
PASSWORD-MIN-NUMERIC-REQ, PASSWORD-MIN-SPECIALCHAR-REQ or
PASSWORD-MIN-ALPHA-REQ) must not be greater than the value of the
PASSWORD-MAXIMUM-LEN attribute.
PASSWORD-MIN-SPECIALCHAR-REQ
Specifies the minimum number of special characters required in a user password
when it is set or changed.
The PASSWORD-MIN-SPECIALCHAR-REQ attribute can have values from 0
through 8. The initial value is 0.
The following considerations apply to the PASSWORD-MIN-SPECIALCHAR-REQ
attribute:
•
The PASSWORD-MIN-SPECIALCHAR-REQ attribute will take effect only when
the PASSWORD-SPECIALCHAR-REQUIRED attribute is enabled.
Note. This attribute is supported only on systems running J06.11 or later J-series RVUs and
H06.22 or later H-series RVUs.
Note. This attribute is supported only on systems running J06.11 or later J-series RVUs and
H06.22 or later H-series RVUs.