Safeguard Audit Service Manual (G06.24+, H06.03+)

Producing SAFEART Reports
Safeguard Audit Service Manual—520480-014
6-4
SET Command
SET Command
The SET commands define the values for these report parameters.
DESTINATION FILE report-file
is the name of a file, tape device, printer, or terminal to which the report is written.
The default is your home terminal. If you issue a SET DESTINATION FILE
report-file command during a session and later want a report displayed at
your terminal, issue a RESET DESTINATION FILE command or a SET
DESTINATION FILE command with no file name.
TITLE title
is a text line printed at the center top of each report page. Each title can be a
maximum of 100 characters long. Quotations marks are required if a title line
consists of more than one word. Both single and double quotation marks are valid.
You can specify up to four title lines by separating each title line with a comma and
enclosing the list of title lines in parentheses.
If you use a RESET TITLE command, SAFEART clears any lines defined by a SET
TITLE command and returns the title to “Safeguard Audit Reduction Tool.”
PAGE SIZE number-of-lines
is the number of lines to be written on a report page. The range is 9 through
10,000. The default is 60 lines.
START TIME starting-time
is the date and time to establish a beginning point for selecting events. Selected
events created on or after starting-time are included in the report.
The format of starting-time is one of:
yyyy/mm/dd hh:mm
yy/mm/dd hh:mm
SET { DESTINATION FILE [ report-file ] }
{ TITLE { (")title (") | ("title", "title",...) } }
{ PAGE SIZE number-of-lines }
{ START TIME starting-time }
{ END TIME ending-time }
{ WHERE expression }
Note. The maximum number of lines allowed in a SAFEART report is 99,999.