Safeguard Audit Service Manual (G06.24+, H06.03+)

Producing SAFEART Reports
Safeguard Audit Service Manual—520480-014
6-8
START Command
SHOW *
displays all values in effect for the current SAFEART session.
Example
This example includes a SHOW * command with the resulting output. The values in the
output reflect the commands used in previous examples in this section.
<=SHOW *
OUT
LOG
AUDIT FILE "$bart.audit.A0000001"
AUDIT FILE "$bart.audit.A0000002"
SET DESTINATION FILE Jun28Log
SET START TIME 94/06/28:00:00
SET END TIME 94/06/28:23:59
SET PAGE SIZE 60
SET TITLE ("Daily Logon Report",&
"Jun 28, 1994")
SET WHERE operation=verifyuser
START Command
The START command begins the process of selecting events to produce a report. Use
START after entering all other SAFEART commands.
Example
After specifying and verifying the report criteria as shown in previous commands, issue
the START command to begin production of the report:
<=START
When the report is completed, SAFEART provides a summary of the audit events and
how they were processed. The summary is written to the OUT file (by default, the
home terminal). Example 6-1 shows a typical report summary.
START
Example 6-1. Sample Report Summary
Records Processed for This Job
1943 complete events.
1 header records.
0 incomplete events.
0 other records.
5154 total records.
74 events printed.