Safeguard Audit Service Manual (G06.29+, H06.08+, J06.03+)

SAFEART Field Descriptions
Safeguard Audit Service Manual — 520480-031
7 - 33
Protection Record
in columns from left to right) are described next. You cannot use these items in
SET WHERE commands.
Column 1 specifies whether the subject is granted or denied the listed access
authorities. Possible values are:
Column 2 contains the user ID of the subject.
Column 3 contains the user name of the subject.
Column 4 lists the access authorities, separated by commas, that the subject is
granted or denied. Possible values are:
Column 5 specifies the type of subject granted or denied access. Possible values
are:
LocalSpecific
indicates that the specified subject must be a local user.
RemoteSpecific
indicates that the specified subject can be either remote or local.
LocalGroup
indicates that the subject must be a local member of the specified user group.
RemoteGroup
indicates that the subject must be a local or remote member of the specified
user group.
LocalAnyone
indicates that the subject can be any local user
.
RemoteAnyone
indicates that the subject can be any local or remote user.
Grant indicates that the ACL entry grant
s the listed authorities.
Deny indicates that the ACL entry denies the listed authorities.
R READ authority
W WRITE authority
E EXECUTE authority
P PURGE authority
C CREATE authority
O OWNER authority